This is our flag ship 10mm LED with wire attached and resistors built in for any 9-14V use. These are called Top bright LEDs on the market. You won't find a brighter 10mm LED.
- Long lasting (over 100000 hours)
- Low Power Consumption
- I.C. Compatible
- Extreme Intensely Bright LED (Most Powerful 10mm we offer)
- 40 +/- degree angle
- 5-Chip Design
- Pre-wired with 6 inches of wire EACH LED separate
Specifications below for BLUE
- Source Material: InGaN
- Emitting Colour: 12VDC 10mm 40° 5-Chips BLUE LED
- LENS Type:Water clear
- Wavelength: 465nm-470nm
- Luminous Intensity-MCD: Min: 120,000mcd Max: 150,000 mcd
- Reverse Voltage: 5.0 V
- DC Forward Voltage: Typical: 12.0 V Max: 15.0V
- DC Forward Current: 100mA
- Viewing Angle:40 degree
- Lead Soldering Temp: 260°C for 5 seconds
- Intensely Bright
Specifications below for RED
- Source Material: InGaN
- Emitting Colour: 12VDC 10mm 40° 5-Chips Red LED
- LENS Type:Water clear
- Wavelength: 625nm-630nm
- Luminous Intensity-MCD: Min: 130,000mcd Max: 160,000 mcd
- Reverse Voltage: 5.0 V
- DC Forward Voltage: Typical: 12.0 V Max: 15.0V
- DC Forward Current:100mA
- Viewing Angle:40 degree
- Lead Soldering Temp: 260°C for 5 seconds
- Intensely Bright
Specifications below for WHITE
- Source Material:InGaN !
- Emitting Colour: 12VDC 10mm 40° 5-Chips 0.5 Watt WHITE LED
- LENS Type:Water clear
- Color Temperature: 6000-8000K White or 3000K Warm White
- Luminous Intensity-MCD: Min: 260,000mcd Max: 280,000 mcd
- Reverse Voltage:5.0 V
- DC Forward Voltage: Typical: 12 V Max: 15V
- DC Forward Current:100mA
- Viewing Angle: 40 degree
- Lead Soldering Temp:260°C for 5 seconds
- Intensely Bright
- Absolute Maximum Ratings at Ta=25°C
|
|
| |
| Items |
Symbol |
Absolute maximum Rating |
Unit |
| Power Dissipation |
PD |
500 |
mW |
| Forward Current(DC) |
IF |
100 |
mA |
| Peak Forward Current* |
IFP |
150 |
mA |
| Reverse Voltage |
VR |
5 |
V |
| Operation Temperature |
Topr |
-40~85 |
℃ |
| Storage Temperature |
Tstg |
-10~100 |
℃ |
| Lead Soldering Temperature |
Tsol |
Max.260°C for 5 sec Max. (3mm from the base of the epoxy bulb) |
|
|
| |
*Pulse width≦0.1msec duty≦1/10 |
|
| |
- Electrical/Optical Characteristics at Ta=25°C
|
|
| |
| Items |
Symbol |
Condition |
Min. |
Typ. |
Max. |
Unit |
| Forward Dissipation |
VF |
IF=100mA |
6 |
/ |
15 |
V |
| Reverse Current(DC) |
IR |
VR=5V |
/ |
/ |
10 |
uA |
| Dominant Wavelength |
X |
IF=100mA |
0.3 |
/ |
0.34 |
/ |
| Y |
IF=100mA |
0.3 |
/ |
0.34 |
/ |
| Luminous Intensity |
IV |
IF=100mA |
/ |
265,000 |
280,000 |
mcd |
| 50% Power Angle |
△θ |
IF=100mA |
35 |
/ |
45 |
deg |
|
Specifications below for Amber also known as Orange
We also offer UV = Ultra Violet and Green and Amber
- Source Material:InGaN
- Emitting Colour:0.5W 10MM HI POWER ORANGE 5-Chips 0.5W LED
- LENS Type:Water clear
- Color Temperature: - 600nm-610nm
- Luminous Intensity-MCD: Typ: 160,000 mcd
- Reverse Voltage:5.0 V
- DC Forward Voltage: Typical:
- DC Forward Current:100mA
- Viewing Angle:40 degree
- Lead Soldering Temp:260°C for 5 seconds
- Power Dissipation:500mW
Common questions:
Are all colors included in the 10 pieces or I can select what color? The price is for 10pcs of 1 color only. If you need multiple colors, you must order them 10 at a time. Sorry we cannot mix match colors. They are prepackaged and sealed.
You mention that there is a resistor wired. Does this mean I do not need a regulated current driver and just a DC power supply? This is 100% correct. Grab a 9V battery or a 12V power supply. Or a car battery. Anything 9-12V DC works fine.
